Victron SmartSolar MPPT 100/50 Charge Controller With Bluetooth

Ultra fast Maximum Power Point Tracking (MPPT):
Especially in the case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In the event of partial shading, the innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.



Virtual Load output:
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be chosen. The load output is short-circuited proof, but some loads (especially inverters) are best connected directly to the battery, with the inverter remote control connected to and triggered by the load output. A special interface cable may be required for this method; please refer to the manual.



BatteryLife intelligent battery management:
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will be continually cycled between a partially charged state and the end-of-discharge state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.

The battery life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.



Other Features:
IP43-rated charger casing and resin-encapsulated electronics offer all vital components exceptional protection from the environment
The programmable battery charge algorithm allows you to tailor the charger's output to your specific requirements
Internal temperature sensor compensates absorption and float charge voltage for the temperature to ensure optimal efficiency
A fully discharged battery recovery function will initiate charging even if the battery has been discharged to zero volts
Optional external battery voltage and temperature sensing via Bluetooth using a Smart Battery Sense or a BMV-712 Smart Battery Monitor
Long 5-year manufacturer warranty for added confidence


Product Data Sheet